TIPO 16Hydraulic Line
Mechanical seal TIPO 16
Pressure
6 bar
Speed
12 m/s
Temperature
200 °C
Available shaft sizes
12 mm1/2"5/8"3/4"20 mm
Technical description
Has the same application as the type 06 seal, in diameters 1/2", 5/8" and 3/4", recommended for equipment with low start/stop frequency (long cycles). Its operating limit is up to 6 bar and 12 m/s.
Dimensional table and coding
Material coding
Select one material per group to build the complete coding in the table.
Elastomers
Rotating Face
Metal Parts
Stationary Face
9 dimensional configurations
Swipe the table to see all measurements
| Coding | Shaft Ø | Ø Amm | Ø Bmm | Ø Cmm | Dmm | Emm |
|---|---|---|---|---|---|---|
| MÉTRICOS | ||||||
1662SS | 12mm | 12,00 | 25,30 | 23,20 | 17,00 | 6,40 |
1662SP | 12mm | 12,00 | 22,00 | 23,20 | 17,00 | 7,00 |
1670S4P | 20mm | 20,00 | 30,00 | 34,00 | 22,22 | 11,00 |
| POLEGADAS | ||||||
1608DS | 1/2" | 12,70 | 25,40 | 23,20 | 19,50 | 7,40 |
1608SH | 1/2” | 12,70 | 25,40 | 23,20 | 19,50 | 10,85 |
1608SS | 1/2” | 12,70 | 25,40 | 23,20 | 19,50 | 7,40 |
1610CS | 5/8” | 15,87 | 31,75 | 30,50 | 20,20 | 10,32 |
1610SS | 5/8” | 15,87 | 31,75 | 30,50 | 22,22 | 10,32 |
1612SS | 3/4” | 19,05 | 34,93 | 34,00 | 22,22 | 10,32 |